riskassessment:gh600lathera
This is an old revision of the document!
Table of Contents
Risk Assessment
| Area assessment is taking place | Warco GH600 Metal Lathe Work Area | |
|---|---|---|
| Assessment undertaken by | Person 1 | Aidan Taylor |
| Person 2 | Name 2 | |
| Persons at risk | Members using the makerspace or working in proximity, visitors to the makerspace | |
Description of activity being assessed
General use of the GH600 Lathe as intended
Identified hazards
- Contact with moving parts of the machine
- Snagging of clothing / loose items / hair in moving parts of the machine
- Chipping of work material, flying debris, high temperature debris
- Distraction while working
- Malfunction of machine
- Unauthorised or improper use of machine
Short description of identified hazard
Controls Applied:
- Short description control applied. e.g. Newport Makerspace members are permitted to use machines requiring induction
- Another short description of a control applied
Recommended Actions:
- Short description of recommended action. e.g. Signage on machine required
Short description of identified hazard
Controls Applied:
- Short description control applied. e.g. Newport Makerspace members are permitted to use machines requiring induction
- Another short description of a control applied
Recommended Actions:
- Short description of recommended action. e.g. Signage on machine required
| Date of Assessment | Review Date | Signature 1 | Signature 2 |
|---|---|---|---|
| DD/MM/YYYY | DD/MM/YYYY | Name 1 | Name 2 |
riskassessment/gh600lathera.1668858567.txt.gz · Last modified: by aidanrtaylor