riskassessment:gh600lathera
This is an old revision of the document!
Table of Contents
Risk Assessment
| Area assessment is taking place | Warco GH600 Metal Lathe Work Area | |
|---|---|---|
| Assessment undertaken by | Person 1 | Aidan Taylor |
| Person 2 | Name 2 | |
| Persons at risk | Members using the makerspace or working in proximity, visitors to the makerspace | |
Description of activity being assessed
General use of the GH600 Lathe as intended
Identified hazards
1. Contact with moving parts of the machine 2. Snagging of clothing / loose items / hair in moving parts of the machine 3. Chipping of work material, flying debris, high temperature debris 4. Distraction while working 5. Malfunction of machine 6. Unauthorised or improper use of machine
Short description of identified hazard
Controls Applied:
- Short description control applied. e.g. Newport Makerspace members are permitted to use machines requiring induction
- Another short description of a control applied
Recommended Actions:
- Short description of recommended action. e.g. Signage on machine required
Short description of identified hazard
Controls Applied:
- Short description control applied. e.g. Newport Makerspace members are permitted to use machines requiring induction
- Another short description of a control applied
Recommended Actions:
- Short description of recommended action. e.g. Signage on machine required
| Date of Assessment | Review Date | Signature 1 | Signature 2 |
|---|---|---|---|
| DD/MM/YYYY | DD/MM/YYYY | Name 1 | Name 2 |
riskassessment/gh600lathera.1668858527.txt.gz · Last modified: by aidanrtaylor