riskassessment:solderingra
This is an old revision of the document!
Table of Contents
Risk Assessment
| Area assessment is taking place | Electronics soldering work area F11C | |
|---|---|---|
| Assessment undertaken by | Person 1 | Aidan Taylor |
| Person 2 | Name 2 | |
| Persons at risk | Members using the makerspace or working in proximity, visitors to the makerspace | |
Description of activity being assessed
Use of soldering irons, reflow station and hand tools for soldering
Identified hazards
- Burns
- Fumes
- Cuts
- Use of lead based solder
1. Burns
Any burns from a soldering iron or reflow station are likely to be minor, but basic measures should be taken to reduce the risk of burns.
Controls Applied:
- Designated work area for soldering must be kept tidy between use and during use.
- Cables for soldering irons to be unravelled before use.
- Risks in relation to hot air with reflow station must be explained to users - this tool requires demonstration before use.
Recommended Actions:
- Suggest to have some signage to request work area to be kept tidy.
2. Fumes
Controls Applied:
- Fume extractors are provided for use with soldering irons
Recommended Actions:
- None
3. Cuts
There is a potential for minor cuts when working with circuit boards, clipping components and using side cutters and other tools in soldering activity
Controls Applied:
- First aid kits are provided in the room and clearly advertised
Recommended Actions:
- None
4. Use of lead based solder
Lead based solder is permitted in the makerspace
Controls Applied:
- Users must wash hands after use
Recommended Actions:
- Signage should be printed and placed on the wall at soldering station reminding users to wash their hands after use of lead based solder
| Date of Assessment | Review Date |
|---|---|
| DD/MM/YYYY | DD/MM/YYYY |
riskassessment/solderingra.1670070309.txt.gz · Last modified: by aidanrtaylor