This is an old revision of the document!
Table of Contents
Makita Angle Grinder
Overview
The Makita DSP600 is a plunge cut circular saw with a brushless motor. It requires two 18V batteries to run. This fast saw has an adjustable speed of between 2,500 and 6,300 RPM. Achieves neat cutting results when used with a guide rail. It has an adjustable guide and guard.
The overhead dust extraction should be powered on when this machine is used.
Link to suppliers catalogue page Link to manual
Safety & Induction
Risk Score: Amber
Risk Assessment: Link
Do I need an induction to use this machine?: Yes
Can I use this machine while lone working?: Yes
| PPE | Required / Suggested / Banned |
|---|---|
| Eye protection | Required |
| Hearing protection | Suggested |
| Gloves | Suggested |
Always check second hand material for the presence of nails before cutting using the tool - we have a nail detector!
Induction Information
- You can get an induction for this machine by submitting a request to contact@newportmakerspace.org, or by completing this google form
- An induction for this machine is expected to take roughly 15 minutes
- The induction will cover setup and safe usage of the tool
Maintenance History
Date next maintenance is due: 01/04/2026
| Date | Member ID | Notes |
|---|---|---|
| 01/10/2025 | John O | PAT test completed |