https://www.newportmakerspace.org/wiki/ 2026-04-17T14:39:24+00:00 https://www.newportmakerspace.org/wiki/ https://www.newportmakerspace.org/wiki/lib/exe/fetch.php?media=logo.png text/html 2025-10-25T01:25:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:charnwoodbandsaw&rev=1761355540&do=diff Charnwood W730 Bandsaw Overview The Charnwood W730 is a 14“ bandsaw for cutting wood, it has an adjustable guide and guard. The machine is on a wheel base so that it can be moved in order to accept material of different sizes. The overhead dust extraction should be powered on when this machine is used. text/html 2025-10-25T01:26:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:charnwoodchipextractor&rev=1761355592&do=diff Charnwood W791 Dust / Chip Extractor [[Picture here, use the media manager]] Overview This machine is a dust and chip extractor intended to be used with other wood working machines. When operating, dust and chips will be diverted to a bag attached to the machine, this needs emptying over time. text/html 2025-10-25T01:22:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:itechplanarthicknesser&rev=1761355348&do=diff iTech 260S Planer Thicknesser Overview The iTech Planer Thicknesser 260S is a dual purpose machine which is designed to prepare wood. It is used to trim down boards to reach a uniform thickness. Thicknesser mode is used to reduce thickness, planer mode is used to get even surfaces / faces. The 260S has a spiral rotary blade which reduces the noise levels when it is operating and reduces the cost of maintenance as the rotor is made up of individually replaceable cutting blades. While quieter … text/html 2025-11-26T20:39:53+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:shophoover&rev=1764189593&do=diff Shop hoovers [[Picture here, use the media manager]] Overview We have two Einhell shop hoovers and a Bosch Professional Wet/Dry Dust Extractor. The bosch dust extractor can be used either as a hoover or plugged into our power tools to prevent dust. When using dust producing tools, please use the hoovers to clean up after use. text/html 2025-11-26T20:28:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:woodpillardrill&rev=1764188919&do=diff Warco 2B5 Pillar Drill Image goes here Overview The Warco 2B5 Pillar Drill is part of the Warco range of well-engineered, workshop drilling machines. It's features include: * Start / stop switch incorporates emergency stop * Fitted with rotary / tilting table text/html 2025-11-12T10:40:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:woodsander&rev=1762944050&do=diff Warco BDS-460 Belt and Disk Sander [Picture here, use the media manager] Overview :!: Machine currently in need of repair - the plastic guard on top of the belt has been snapped. The BDS-460 is a miniature fixed sanding machine for use with wood only. It features a small disk sander which can be used for cleaning and smoothing edges of material, and a belt which can be used for smoothing surfaces. The disk has a plate and an angle guide so that material can be aligned. The belt can be set in… text/html 2025-10-25T01:26:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.newportmakerspace.org/wiki/doku.php?id=equipment:woodworking_room:workbee&rev=1761355569&do=diff Ooznest Workbee CNC Mill Overview The Ooznest Workbee is a CNC machine that came as a flatpack build - A number of members have contributed to building this machine and it was put together over many hours! A CNC milling machine is like the reverse of a 3D printer. Where a 3D printer starts with nothing and builds up a 3D model layer by layer, a CNC miller starts with a lump of material and cuts away at it layer by layer to get a 3D model.