Creudy Casnewydd / Newport Makerspace Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== iTech 260S Planer Thicknesser =====

{{ equipment:images:img_20220701_124546.jpg?400 |}}

==== Overview ====

The iTech Planer Thicknesser 260S is a dual purpose machine which is designed to prepare wood. It is used to trim down boards to reach a uniform thickness. Thicknesser mode is used to reduce thickness, planer mode is used to get even surfaces / faces. The 260S has a spiral rotary blade which reduces the noise levels when it is operating and reduces the cost of maintenance as the rotor is made up of individually replaceable cutting blades. While quieter than standard planer thicknessers, this machine is still loud!

This machine should be connected to the chip extractor by hose, the chip extractor and overhead dust extraction unit should both be powered on when the 260S is in use.

[[https://www.scosarg.com/itech-260s-spiral-planer-thicknesser-1ph-230v|Link to suppliers catalogue page]]
A paper manual is kept for this machine in the Makerspace

----

==== Safety & Induction ====

:!: Risk Score **Red**

:!: Risk Assessment: {{ :equipment:risk_assessments:nmcc_-_risk_assessment_-_planer_thicknesser_-_2025.docx | Link}}

:!: Do I need an induction to use this machine? **Yes**

:!: Can I use this machine while lone working? **No**

^ PPE      ^ Required / Suggested / Banned      ^
|Eye protection|Required|
|Hearing protection|Required|
|Gloves|Suggested|

Always check material for the presence of nails before feeding into machine - we have a nail detector!

=== Induction Information ===

:!: Do I need an induction to use this machine?: **Yes**

  * You can get an induction for this machine by submitting a request to contact@newportmakerspace.org, or by completing [[https://forms.gle/bCzqRAGGd8Da9bwJ8|this google form]]
  * An induction for this machine is expected to take up to 1 hour
  * The induction will cover setup and safe usage of the machine in both modes

==== Maintenance History ====

Date next maintenance is due: **01/04/2026**

^ Date      ^ Member ID      ^ Notes          ^
| 01/10/2025 | John O | PAT test completed |
|  |  |  |
|  |  |  |